Arrow Racks.
Arrow straighteners.
Foot Markers.
The arrow shafts I use are either Spruce, Pine, but can use Port Orford Cedar if required.
Arrows can be, parallel, chested(front taper), bob-tailed (rear taper) or barrelled (taper both ends).
All styles can be footed if required. I use a 3 point foot rather than the more usual 2 or 4 point foot as I feel this is the strongest footing method there is.
All shafts are individually spine tested and weight checked to ensure a minimum variance in weight and spine within each dozen.
A basic set will normally be matched within a tolerance of 5 pounds of spine and within 10 grains in weight, and matched sets within 3 pounds of spine and 5 grains in weight.
All arrows are completed with the best quality fletchings of your desired colour (if available), shape and size and complementary cresting can also be added to give your arrows that individual look.
TopHat piles are used exclusively on all arrows as are AAE nocks.
Arrows are finished off with multiple coats of Manns ultra-tough polyurethane varnish giving a high gloss long-lasting finish.
I can now also supply a small range of additional items, Arrow racks in 12.18 and 24 arrow versions, Arrow straighteners and foot markers.
ARROWS, due to the nature of use cannot be guaranteed.